Search results for: 'cold rolled sheets 13 gauge'

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

22 Gauge (0.0299") Cold Rolled Steel Sheet, measuring 48" x 120". Typically produced from 1018 steel, this sheet offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability. Its thin gauge is perfect for automotive panels, appliance casings, electronic enclosures, and other applications requiring a paint-ready finish. In stock for same-day Los Angeles pickup. Learn More

11 Gauge Cold Rolled Steel Sheet, measuring 48" x 120". Produced from 1018 grade steel, this sheet conforms to ASTM A1008 standards and features a tensile strength of 63,800 PSI. Its smooth, oiled surface and superior dimensional tolerance make it ideal for automotive panels, appliance casings, and enclosures where a paint-ready finish is critical. In stock for same-day pickup in Los Angeles. Learn More

20 Gauge Cold Rolled Steel Sheet, 4' x 10' size. Grade 1018, conforming to ASTM A1008. Features a smooth, clean surface finish and tight dimensional tolerances. With 63,800 PSI tensile strength, it offers excellent formability for bending and moderate drawing. This thin gauge is ideal for automotive panels, appliance casings, and electronic enclosures. In stock for immediate pickup in Los Angeles. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

10 Gauge Cold Rolled Steel Sheet, 48" x 120". Made from commercial quality steel (1018 typical) with a tensile strength of 63,800 PSI. The cold rolling process provides a smooth, scale-free surface and tight dimensional tolerances, making it ideal for forming, stamping, and welding. Perfect for automotive panels, appliance casings, and equipment enclosures. In stock and ready for same-day pickup in Los Angeles. Learn More

14 Gauge (48" x 120") 1018 Cold Rolled Steel Sheet, conforming to ASTM A1008. Features 63,800 PSI tensile strength, superior dimensional tolerance, and an exceptionally smooth surface finish ideal for painting or powder coating. Excellent formability makes it a top choice for automotive panels, appliance casings, metal enclosures, and precision stamped parts. In stock for same-day pickup in Los Angeles. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

16 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. This material conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, providing excellent weldability and good formability. Its medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication projects where precise dimensions are not critical. A cost-effective solution for robust applications. In stock for Los Angeles pickup. Learn More

10 Gauge A36 Hot Rolled Steel Sheet, measuring 48" x 120". Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI and tensile strength of 58,000-80,000 PSI. Its excellent weldability and good formability make it a cost-effective choice for structural applications, gusset plates, and general fabrication projects where precise tolerances are not required. In stock for immediate Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" A36 Hot Rolled Steel Sheet. ASTM A36 certified, with a minimum yield strength of 36,000 PSI and excellent weldability. The medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication. The hot rolled mill finish is suitable for applications where finish is secondary to strength. In stock for same-day Los Angeles pickup. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

24 Gauge (0.0239") 304 Stainless Steel Sheet, 48" x 120", with a 2-B mill finish. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, high ductility, and 73,200 PSI tensile strength. Its thin gauge is ideal for forming electronic enclosures, decorative panels, and food processing applications. In stock for same-day Los Angeles pickup. Learn More

20 Gauge (0.0359") 304 Stainless Steel Sheet, measuring 48" x 120". Conforming to ASTM A240, this versatile sheet offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior formability. The 2-B mill finish is suitable for a wide range of uses. Its thin gauge is ideal for formed brackets, electronic enclosures, and decorative panels. In stock for immediate Los Angeles pickup. Learn More

18 Gauge (0.0478") 304 Stainless Steel Sheet, measuring 48" x 120". This versatile sheet meets ASTM A240 standards and features 73,200 PSI tensile strength, excellent formability, and superior corrosion resistance. Its thin gauge is ideal for architectural trim, food processing equipment, kitchen backsplashes, and decorative panels. The 2-B mill finish provides a smooth, reflective surface. In stock for Los Angeles pickup. Learn More

10 Gauge (0.1345") 304 Stainless Steel Sheet, 48" x 120", with a standard 2-B mill finish. Conforming to ASTM A240, it combines 73,200 PSI tensile strength with excellent corrosion resistance and formability. This medium thickness is ideal for structural panels, machine guards, and food processing equipment. In stock for immediate Los Angeles pickup. Learn More

14 Gauge (0.0781") 304 Stainless Steel Sheet, measuring 48" x 120" (4' x 10'). This versatile austenitic sheet conforms to ASTM A240, offering excellent corrosion resistance and ductility. With a tensile strength of 73,200 PSI, it's a standard for structural panels, food processing equipment, and architectural cladding. Its 2-B mill finish is suitable for a wide range of applications. In stock for Los Angeles pickup. Learn More

18 Gauge 304 Stainless Steel Sheet (48" x 120") with a #4 brushed finish and protective PVC coating. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, formability, and 73,200 PSI tensile strength. Its lightweight yet durable profile is ideal for architectural panels, kitchen backsplashes, and food processing equipment. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C6 x 13 size, measuring 6" in depth with a 2.157" flange and weighing 13 lbs/ft. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its large size is ideal for equipment frames, structural supports, trailer frames, and general fabrication projects requiring robust performance. In stock for Los Angeles pickup. Learn More

20 Gauge Galvanized Steel Sheet, 48" x 120" (4' x 10'). Conforms to ASTM A653, featuring a protective zinc coating for excellent corrosion resistance in outdoor environments. This thin gauge sheet is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork. It combines the strength of steel with the durability of galvanization. In stock for immediate Los Angeles pickup. Learn More

18 Gauge Galvanized Steel Sheet (4' x 10'). Conforming to ASTM A653, this sheet features a hot-dip zinc coating for excellent rust and corrosion resistance. The thin 18 gauge thickness is easy to form, making it ideal for HVAC ductwork, automotive panels, roofing, and protective enclosures. Its base steel provides good strength and durability for various fabrication projects. In stock for Los Angeles pickup. Learn More

22 Gauge 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating, measuring 48" x 120". This versatile sheet conforms to ASTM A240, offering 73,200 PSI tensile strength and excellent corrosion resistance. Its thin gauge and clean finish make it ideal for architectural applications, kitchen backsplashes, decorative trim, and food processing equipment. In stock for Los Angeles pickup. Learn More

12 Gauge (0.105") Galvanized Steel Sheet, 48" x 120". This sheet conforms to ASTM A653 and features a protective zinc coating applied via a hot-dip process for excellent corrosion resistance. Its medium thickness provides a balance of strength and formability, making it ideal for structural panels, HVAC ductwork, automotive components, and outdoor enclosures. In stock for same-day Los Angeles pickup. Learn More

16 Gauge (0.0625") 304 Stainless Steel Sheet, 48" x 120", with a protective #4 brushed PVC finish. This versatile sheet conforms to ASTM A240 and offers 73,200 PSI tensile strength, excellent formability, and corrosion resistance. Ideal for architectural applications, kitchen backsplashes, and decorative panels. In stock for Los Angeles pickup. Learn More

11 Gauge (0.1196") 304 Stainless Steel Sheet, 48" x 120", with a protective #4 brushed PVC finish. This versatile sheet conforms to ASTM A240 and offers 73,200 PSI tensile strength, excellent corrosion resistance, and great formability. Its medium thickness is ideal for architectural cladding, food processing equipment, and structural panels. In stock for same-day Los Angeles pickup. Learn More

20 Gauge (4' x 10') 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating. Conforms to ASTM A240 with 73,200 PSI tensile strength, excellent formability, and corrosion resistance. The thin gauge is ideal for architectural trim, kitchen backsplashes, and protective paneling. In stock for immediate Los Angeles pickup. Learn More

22 Gauge Galvanized Steel Sheet, measuring 48" x 120". This product conforms to ASTM A653 and features a protective hot-dip zinc coating for excellent corrosion resistance. Its thin gauge offers great formability, making it ideal for HVAC ductwork, flashing, automotive panels, and protective enclosures. Combines steel strength with long-term durability in outdoor or high-moisture environments. In stock for Los Angeles pickup. Learn More

14 gauge (0.0781") 304 Stainless Steel Sheet, 48" x 120", with a #4 brushed PVC finish. Conforms to ASTM A240, delivering excellent corrosion resistance and high ductility. The #4 finish provides a uniform, directional grain ideal for aesthetic applications like architectural trim and appliance panels. This versatile sheet is suitable for forming, welding, and fabrication. In stock for Los Angeles pickup. Learn More

14 Gauge (0.075") Galvanized Steel Sheet, 48" x 120". Conforming to ASTM A653, this hot-dip zinc-coated steel provides excellent corrosion resistance for outdoor and high-moisture applications. Its base metal offers up to 80,000 PSI tensile strength, combining durability with formability. Ideal for HVAC ductwork, roofing panels, automotive components, and agricultural equipment. In stock for immediate Los Angeles pickup. Learn More

16 Gauge (0.060") thick Galvanized Steel Sheet, 48" x 120". Conforms to ASTM A653 standards, featuring a protective zinc coating for excellent corrosion resistance in outdoor or high-moisture environments. This versatile thickness is ideal for HVAC ductwork, electrical enclosures, flashing, and light-duty fabrication. Combines the strength of steel with superior rust protection. In stock for Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" Galvanized Steel Sheet. This product conforms to ASTM A653 standards, providing excellent corrosion resistance through a protective hot-dip zinc coating. It combines the strength and formability of steel with superior durability for outdoor or high-moisture environments. Ideal for roofing, HVAC, automotive panels, and general fabrication. In stock for Los Angeles pickup. Learn More

10 Gauge (0.135") 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating, measuring 48" x 120". This product conforms to ASTM A240 standards, offering excellent corrosion resistance and formability. Its medium thickness is ideal for fabricating structural panels, machine guards, and food processing equipment. In stock for immediate cutting and pickup in Los Angeles. Learn More

24 Gauge Galvanized Steel Corrugated Sheet, measuring 42 x 96 inches. Conforming to ASTM A653, this sheet features a protective zinc coating for excellent corrosion resistance and a tensile strength of 58,000-80,000 PSI. Its lightweight and durable nature makes it ideal for roofing, siding, agricultural buildings, and various DIY projects. In stock for same-day Los Angeles pickup. Learn More

24 Gauge Galvanized Corrugated Steel Sheet, measuring 42 by 120 inches. Conforming to ASTM A653, this G90 zinc-coated sheet provides excellent corrosion resistance for outdoor applications. It features a minimum yield strength of 36,000 PSI, suitable for roofing, siding, and agricultural building panels. This lightweight, formable material is easy to install for both new construction and repairs. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized Corrugated Steel Sheet, 42 inches wide by 144 inches long. Conforming to ASTM A653, this panel offers excellent corrosion resistance from its protective zinc coating. Ideal for roofing, siding, and fencing applications requiring durability and weather protection. Its lightweight nature simplifies installation for agricultural, commercial, and DIY projects. In stock for immediate Los Angeles pickup. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

Hot Rolled Flattened Expanded Metal

• A - Thickness: 0.070"
• Holes: 1/2"

Learn More

0.063" x 48" x 120" 5052-H32 Aluminum Sheet. Conforming to ASTM B209, this sheet provides a balance of strength (33,000 PSI tensile) and excellent formability. Its superior corrosion resistance makes it ideal for marine environments, fuel tanks, and automotive body panels. This medium-gauge sheet offers excellent weldability for fabricated assemblies. Available for same-day pickup in Los Angeles. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

Learn More

Learn More

Learn More

0.090" x 48" x 120" 3003-H14 Aluminum Sheet. Conforming to ASTM B209, this material features 22,000 PSI tensile strength, excellent formability, and good corrosion resistance. This versatile, medium-gauge sheet is ideal for vehicle body panels, machine guards, and general fabrication projects requiring moderate strength. In stock for immediate pickup in Los Angeles. Learn More

0.032" x 48" x 120" 5052-H32 Aluminum Sheet. Conforms to ASTM B209 with 33,000 PSI tensile strength. This non-heat-treatable alloy offers excellent formability and superior corrosion resistance, especially in marine environments. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock for immediate pickup in Los Angeles. Learn More

26 Gauge Bobco Rib Galvanized Steel Sheet, measuring 36" wide by 120" long. Produced from zinc-coated carbon steel conforming to ASTM A653 standards, it provides excellent corrosion resistance and durability. The ribbed profile adds structural rigidity, making it an ideal choice for residential roofing, commercial siding, and agricultural building applications. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

A 0.032" thick, 48" x 120" sheet of 3003-H14 aluminum. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. This thin gauge is lightweight, weldable, and corrosion-resistant, making it ideal for HVAC ductwork, electronic enclosures, formed brackets, and decorative panels. In stock Los Angeles. Learn More

20 Gauge Galvanized Steel B-Deck sheet, measuring 36" x 144". Conforms to ASTM A653 with a zinc coating for excellent corrosion resistance. This structural panel provides a 36,000 PSI yield strength, making it ideal for roofing, flooring, and siding applications where a strong, lightweight, and weather-resistant material is required. In stock for immediate Los Angeles pickup. Learn More

0.025" x 48" x 120" (4' x 10') sheet of 3003-H14 aluminum. This versatile alloy conforms to ASTM B209 and offers moderate strength, excellent formability, and good corrosion resistance. The thin 0.025" gauge is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork where light weight and workability are key. In stock for same-day Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

3/16" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, clean finish. This small-diameter rod is ideal for manufacturing pins, dowels, small shafts, and fastener blanks. In stock for Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

2 inch diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free finish. This medium-sized bar is ideal for manufacturing shafts, axles, and high-precision machined components where straightness and surface quality are critical. In stock for Los Angeles pickup. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

0.040" x 48" x 120" sheet of 5052-H32 Aluminum, a non-heat-treatable alloy known for excellent formability and corrosion resistance. This sheet meets ASTM B209 standards and has a tensile strength of 33,000 PSI. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock Los Angeles. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1-3/8" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and other high-precision machined components. In stock for immediate Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

3/16" x 3/16" 1018 Cold Rolled Square Bar, 144" length. Conforming to ASTM A108, this material offers a clean surface finish, tight dimensional tolerances, and excellent machinability (70% vs 1212). With 63,800 PSI tensile strength, its small profile is ideal for keys, dowels, and precision machined components. Ready for fabrication and in stock for Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

15/16" diameter 1018 Cold Rolled Steel Round bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108 and offers 63,800 PSI tensile strength. Its excellent machinability, tight tolerances, and smooth finish make it ideal for manufacturing medium-sized shafts, axles, pins, and various machined components. In stock for same-day Los Angeles pickup. Learn More

3/8" diameter 1018 Cold Rolled Round Bar in 144" lengths. This general-purpose steel conforms to ASTM A108, offering 63,800 PSI tensile strength, superior dimensional tolerances, and a smooth finish. Its excellent machinability makes it ideal for producing pins, dowels, fastener blanks, and small shafts requiring precision and good weldability. In stock for Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

3003-H14 Aluminum Sheet, 0.0604" thick, 48" wide, and 120" long. This versatile alloy conforms to ASTM B209 and offers an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it a top choice for general sheet metal work, HVAC ducting, fan blades, and automotive panels. In stock for immediate pickup in Los Angeles. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

0.063" x 48" x 96" (4x8) sheet of 3003-H14 Aluminum. This versatile alloy meets ASTM B209 standards and provides an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it ideal for general sheet metal work, HVAC ductwork, fuel tanks, and fan blades. In stock for immediate Los Angeles pickup. Learn More

2-1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its large diameter makes it ideal for heavy-duty shafts, large machined parts, industrial rollers, and forging stock applications. In stock for Los Angeles pickup. Learn More

1-1/2" diameter 1018 Cold Rolled Round Bar in a 144" length. Conforming to ASTM A108, this bar offers 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for machining. The medium diameter is perfect for manufacturing shafts, axles, pins, and various industrial components. In stock for immediate Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

0.0404" x 48" x 120" (4'x10') 3003-H14 Aluminum Sheet. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. Its good workability and corrosion resistance make it ideal for general fabrication. This thin gauge is perfect for HVAC ductwork, formed brackets, and decorative panels. In stock for same-day pickup in Los Angeles. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More