Bottom Track
Bottom Track
Find high-quality galvanized top track in Los Angeles at Bobco Metals. We offer durable, corrosion-resistant tracks for framing systems. Get expert advice and l
- Hot-dip galvanized coating for maximum corrosion resistance in Los Angeles climates.
- Precision-formed U-channel design for secure stud capture and easy installation.
- Available in multiple gauges and depths to match standard metal stud sizes.
- Ideal for interior walls, ceilings, partitions, and exterior curtain wall systems.
- Locally stocked in Los Angeles for immediate pickup or delivery to your job site.
Bobco Metals in Los Angeles is your premier source for high-quality galvanized top track, a fundamental component in modern metal framing systems. This track is engineered to work in conjunction with studs to create robust and stable wall assemblies, ceilings, and partitions. The primary function of the top track is to cap the vertical studs, providing a secure channel that locks the entire framework into place. This ensures structural integrity, precise alignment, and a solid base for attaching drywall or other finishing materials. At Bobco Metals, we understand that the success of any construction or renovation project hinges on the
reliability of its core components. Our galvanized top track is manufactured from high-strength steel and then coated with a protective layer of zinc through the hot-dip galvanizing process. This finish is critical for projects in Los Angeles and surrounding areas, where environmental factors can challenge material longevity. The zinc coating acts as a sacrificial barrier, preventing rust and corrosion even in humid or coastal conditions, thereby extending the life of the structure. We cater to a wide range of professionals, from large commercial contractors to independent residential builders and skilled DIY enthusiasts. Our team is committed to providing not only
superior products but also the technical knowledge to ensure you select the right track for your specific application. Whether you are framing interior walls in a new office building, creating soundproof partitions, or working on a residential remodel, our galvanized top track offers the consistent quality and performance you need. Visit our Los Angeles location to explore our inventory and benefit from our local expertise and reliable service.
Specifications
- Form: Standard mill shapes and sizes
- Tolerances: Per ASTM standards
- Lengths: 20' and 40' standard, custom lengths available
Values may vary by mill & heat; verify against the MTR for your order.
Applications
- Galvanized top track from Bobco Metals is a versatile component used extensively in construction throughout Los Angeles
- Its primary application is in metal stud framing systems for interior non-load-bearing walls and partitions in commercial offices, retail spaces, hospitals, and multi-family residential buildings
- It is essential for creating suspended ceiling grid systems, providing the perimeter support
- The track is also used in exterior wall assemblies as part of curtain wall systems, where it helps define the plane and secure the studs
- For sound control, it is integrated into staggered stud or double-wall partitions
- In renovation work, it is ideal for framing new walls in existing concrete or steel structures due to its non-combustible nature and ease of installation
Weldability
- Welds readily by MIG, TIG, Stick, or Flux-core processes
- Select filler based on section thickness and requirements
- Remove mill scale in weld area for best results
How to Measure
Accurate measurement is key for a successful installation. First, determine the required track length by measuring the total linear footage of the top of the wall or ceiling to be framed. Always add a small percentage for waste and cutting errors. Second, identify the correct track depth, which must match the depth of the metal studs you are using (e.g., 3-5/8 inch studs require 3-5/8 inch track). Third, confirm the required gauge (thickness) based on the structural demands of the project. When cutting track to length, use aviation snips or a power saw with a metal-cutting blade, and ensure cuts are square. For precise projects, consult with a Bobco Metals expert in Los Angeles for guidance.
Order Checklist
- Product specification and required dimensions
- Grade (e.g., ) and quantity needed
- Length requirements (standard or custom cut-to-size)
- Surface finish requirements (as-rolled, cleaned, primed)
- Any certifications (Mill Test Report - MTR) for traceability
- Special handling or packaging needs
Quick Facts
- Quality
- Premium grade materials
- Stock
- Available from Bobco Metals Los Angeles
- Certifications
- Mill certification available
Need Stock Sizes?
Bobco Metals in Los Angeles maintains a comprehensive local inventory of galvanized top track to meet immediate project needs. Stock sizes are primarily defined by the stud depth they accommodate. Common flange widths are 1-1/4 inches or 1-3/8 inches. Popular depths include 2-1/2 inches (for 2x4 wal
ls), 3-5/8 inches (for 2x4 walls with deeper cavity), 4 inches, and 6 inches for larger wall assemblies. Standard material thicknesses in stock are typically 25 gauge, 20 gauge, and 18 gauge, catering to a range from light commercial to heavy-duty framing. Lengths are commonly available in 10-foot a
See Specifications